Autowatch Ghost Immobiliser Installation
The Ghost is the UK’s most advanced aftermarket immobiliser that works with CAN buses. It's discreet, doesn't use LED indications or key fobs and is hidden within the wiring of the vehicle.
It also permits the user to turn off the system temporarily through Transport Mode to use it when they are renting their vehicle. This guide will walk you through the process of installing an Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a advanced security device that safeguards your vehicle against hacking, key cloning, and relay attacks. The system is linked directly to the ECU of your car and secured by a PIN code you set. It is inaccessible to thieves using diagnostic scanners and other advanced methods. It cannot be disabled using circuit cuts.
The system is simple to use, however it's important to have professional installation to ensure a secure and secure connection with your vehicle's ECU. Installers certified by Thatcham can assist with the installation and programming of your Ghost system. They can also recommend an alarm or tracking system to complete the protection package for your vehicle.
To prevent an accidental deployment of short circuits or airbags, the installer must first disconnect your battery. After this is completed, the installer can safely begin work. Basic hand tools can be used to make precise connections. A multimeter is a great tool to check electrical values. Insulation tape and cable tie are crucial to ensure connections are secure and ensure that wiring is neat. The Ghost Immobiliser user's manual will give specific instructions that are specifically tailored to your specific model.
During the installation process, it's crucial to select an area for grounding that is free of any paint or debris. Installers should also ensure that the immobiliser's wires CAN H & the CAN L are connected to the appropriate ECU ports. These wires can be plugged into or soldered based on the model. To ensure a stable and long-lasting connection, it is recommended that you choose a top-quality plug.
Transport Mode can be activated by the client after the installation is completed. This allows mechanics or valet parking to use the vehicle without having to know the pin code. To accomplish this, the user must press the service button on the dashboard five times in the space of two seconds. Once this is done the system will confirm by displaying 5 signals.
The Autowatch Ghost 2 immobiliser is TASSA certified and is an extremely efficient immobiliser. It's a great option for those who regularly rents their vehicle on platforms like Turo. Immobilisers can lower the cost of insurance, as it decreases the likelihood of theft.
Getting Started
If you're looking for a solution to secure your vehicle from thieves it is best to go with an autowatch ghost immobiliser. The device prevents your vehicle from starting if someone steals or copies your key. This is due to its advanced technology that is designed to stop the engine from starting unless the correct PIN code is entered.
The device connects to the CAN bus network of your vehicle which allows it to communicate with the ECU directly. It uses the buttons on your steering wheel and dashboard to create a unique sequence which only you are aware of. This makes it impossible for anyone else to start your car. This is the ultimate system to protect your pride and joy. It will keep its value intact in the event that you decide to sell it.
Installing a ghost ignition is an easy process, however, it's important to follow the directions carefully to avoid electrical issues and system malfunctions. You'll need to locate a 12V power supply and a suitable grounding for the car's chassis. Then, you can begin connecting the wires to the immobiliser. Use high-quality connectors and soldering methods to create a secure connection. Also, make sure to insulate the connections by using heat shrink tubing or insulation tape to shield them from electrical short circuits and other issues.
After the wires are connected, you are able to connect the battery and start the engine to determine whether the immobiliser works. Once you have verified that everything is functioning properly, you can install the immobiliser in a safe location in the vehicle. Make sure ghost 2 immobiliser cost hide it well to prevent any thief from taking advantage of it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association), which means it is a high-quality deterrent to car thieves. It provides superior protection against key cloning, hacking and relay attacks, and isn't able to be disabled unless you know the code. It is also simple to use and can be set into an auto valet mode so that your car will not be activated when you bring it in for service or an MOT.
Wiring
The Ghost Immobiliser, a cutting modern security system, was designed to prevent vehicle theft. It communicates with your vehicle's ECU and connects directly to the CAN bus. The Ghost Immobiliser does not interfere with your vehicle's factory settings unlike other aftermarket systems which require the removal of circuit elements.
It's also completely undetectable to thieves using diagnostic scanning devices. The system doesn't transmit or receive radio frequency signals, but instead uses CAN data to communication with your ECU. Furthermore, it doesn't require any modifications to your vehicle's existing key fobs.
To utilize the Ghost Immobiliser, simply switch on the ignition of your car and then enter the sequence to disarm (either one or two buttons). The indicator will flash twice to verify that you've entered the correct code. After this, you can start your vehicle and drive off in peace.
Once installed Once installed, the Ghost Immobiliser will secure your vehicle from key cloning and hacking while preserving the value of your pride and joy. In Transport Mode, you can temporarily disable the Ghost Immobiliser when you have to hand your car to service or valet park.
You'll require a continuous power source (12V) in addition to an earthing point to complete the installation of the Ghost immobiliser. Make sure that both are well-insulated and can be touched. It is also recommended to use cable ties to bundle and secure the wires, as this will reduce the risk of being tampered with by thieves. To avoid mistakes, make sure to double-check these points and mark them using a label or tape. Check all connections for signs that they are wearing out. Make sure that all connections are firmly in place, and are properly insulated. Make sure to test your Ghost Immobiliser after installation has been completed. This will confirm that the unit functions properly and that all connections and insulation are safe. If you encounter any issues, you must be sure to resolve them immediately.
Testing
The Autowatch Ghost Immobiliser is a cutting-edge car security system that integrates seamlessly into your car's ECU to prevent unauthorised engine start. The innovative technology it uses protects your car from hacking, key cloning, and other common tactics that thieves employ to steal vehicles. The Ghost is a perfect complement to existing tracking and alarm systems to provide the best protection for your vehicle. The Ghost's unique features, paired with its secluded design makes it a sought-after option for both car enthusiasts and security conscious drivers.
It is important to follow the procedures for installation to ensure a correct integration of the Ghost Immobiliser. The best way to begin is to refer to the vehicle's wiring diagram that serves as a guideline for locating and connecting the required wires. The next step is to determine the grounding and power sources. Once you've found them, you will need to mark the points so that they are easy to identify when installing. Finally, it's essential to use high-quality tools and materials. Basic hand tools can aid in making precise connections. A multimeter will check electrical values, and also ensure security. Insulation tape and cable ties will keep the connections tidy and neat. A Ghost-specific user's manual is also available.
Before beginning the installation it is essential to test the system by entering the PIN code, then starting the vehicle. This test will verify that the immobiliser is working as it should and prevent unauthorised vehicle starts. It is recommended to complete this procedure regularly as part of your regular vehicle inspections to ensure that the system is always functioning properly.
After the installation has been completed, you are now able to start driving your car with confidence. The Ghost will guard your pride and joy from would-be car thieves. It will ensure that no one will take your car away without having the correct PIN code. The Ghost can also be paired with a tracker that is approved by Thatcham to detect any attempts at tampering or theft, allowing you to locate your vehicle if it's stolen.
The Ghost is compatible with a wide variety of vehicles, including those from all major manufacturers. Monty's Locksmith can assist you in securing your vehicle with this innovative device. Contact us today to find out more about our services and installation options. We are a TASSA registered installer, a certificate that assures us that we follow strict guidelines for the installation of our products. This reassures customers, insurers and law enforcement agencies that all installations are completed in a safe and correct manner.